This Toilet Bidet Sprayer uses a simple rotary switch to replace the complex button plate, rotates to the right for Posterior Mode (strong water pressure with stronger cleaning strength), and turns to the left for the Feminine Mode (relatively soft weak water pressure). The two modes fully reflect the humanized design.
This toilet bidet sprayer has a thickness of 0.19 inches, which is 60% thinner than the traditional bidet 0.47 inches. And the edge of the bidet attachment is improved so that it fits the toilet completely and can be integrated with the toilet.
Most two-piece standard toilets are compatible, so there is no need to worry about mismatches.
The bidet sprayer has Adjustable water pressure feature : The Ultra-slim bidet rotation controller will adjust the water pressure according to the rotation angle of the controller, and the larger the angle of rotation, the larger the water pressure.
When it starts to rotate 15-20 degrees, the nozzle will start to water, and the water pressure will be the largest when it is rotated to 90 degrees.
Has Nozzle Protection Design : The upper part of the bidet nozzle has a concave downward design, which makes the nozzle have a proper gap with the toilet pedestal ring.
It can prevent the nozzle from being broken by the toilet pedestal ring due to external force when using the toilet.
HOW TO INSTALL ?
Step 1 : Shut off the water supply valve on the wall. Then drain all the water in the toilet tank, and remove the toilet seat.
Step 2 : Place bidet on the toilet and align the bidet's adjustable plate holes to the toilet seat holes . Screw the toilet seat back on the toilet.
Step 3 : The black rubber gasket must be placed on the T-shaped adapter in the correct direction.(Optional: Apply thread seal tape to the threads of the bidet water inlet and T-Adapter.)
Connect the T-Adapter to the toilet tank water inlet. Hand tighten. Connect the other end of the metal braided metal hose to the T-Adapter. Hand tighten.
Step 4 : Connect the existing water supply flexible hose to the other end of the T-Adapter. Hand tighten. Then Connect one end of the flexible braided metal hose to the water inlet of the bidet. Hand tighten, Open the water supply valve.Check connections for water leaks. Tighten connections where there is a leak until leak stops.
The bidet sprayer is made of environmentally friendly ABS material. Attached accessories are brass T-shaped adapter and braided steel cold water hose.
The overall quality of the bidet toilet seat attachment is optimized, and traditional plastic is replaced, which improves the durability and cost-effectiveness of the bidet for toilet.
Package Includes :
- Bidet Seat*1.
- Braided Metal Hose*1.
- Brass T-adapter*1.
- Fixing Plates*2.
- Rubber Washer*1.
- Seal Tape*1.
- Instruction Manual*1.
